东莞市恒迈实业有限公司

大量批*Primer 702冷凝剂

PRIMER 702 DATA SHEET

D*CRIPTION 

Primer 702 is a solvent-based accelerator designed to speed the cure of 

Henven Cyanoacrylate Adhesive.

APPLICATIONS

Primer 702 is a single component non-CFC solvent based Cyanoacrylate

adhesive accelerator, this product is formulated for promoting the speed

of cure of Henven Cyanoacrylate Adhesive. It is suitable for per-or-post

-applied to bond Securing wires or coils to PCBs tamper-proofing adjustable

components. Mounting standoffs, edge guides and board stiffeners.

PROPERTI*

Fast drying Primer 702 is a blend of flammable solvents.

Care must be taken to avoid naked flames. Prmier 702 has the ability to

reduce odors and blooming but excessive deposits will increase blooming

due to rapid polymerization.

INTRODU*IONS FOR USE

Ensure parts are clean, dry and free from oil and grease.

Primer 702 can be use to speed cure by brushing or spraying onto the surface,

applying drop wise, and the *glue and then over spraying to cure

fillets such as on a wire tacking jobs

MULTI PURPOSE  CA'S  ACCELERATOR

For surface and speed cure of all t*es of Cyanoacrylate Adhesive.

PRODU* APPEARANCE

Carrier Solvent      Heptanes

Color            Yellowish liquid

Cure Speed       V. Fast, Usual<10 sec

Viscosity          < 5 cps

Gap Fill          Thick * glues

Flash point          -4 ℃

Specific Gravity     0.684

CURE PERFORMANCE

Performance is dependent on the adhesive viscosity. Low viscosity gets

quicker setting and the setting time for higher viscosity<10 seconds.

For gels t*e Cyanoacrylate Adhesive, dependent on the techniques

always not more than 30 seconds.

STORAGE

Store in a cool area out of direct sunlight. See safety instructions on the

flammable grade 

备注： 此型号为喷雾型固化剂，200ml/瓶，一箱12瓶。