东莞市恒迈实业有限公司

WINKING EPOXY ADH*ION SYSTEM

GENERAL D*CRIPTION
 
This is an one component,solvent free,hot curing system,rigid epoxy adhesive and insulation for blob *.It is suitable for the high quality electrical

industry.The material can be mixed with solvent to lowe the viscosity.

PROPERTI* OF UNCURED  MATERIAL: (@25℃)

1.Appearance:                           Black  dense  Liquid 
2.Viscosity:                         

3.Density:                             

4.Shelf  Life:                                          

5.Gel  Time:                          

6.Curing  Time:                        

PROPERTI*  OF  CURED  (Curing  Condition: 120℃/2 Hrs)

Hardness                     Shore D           90     ASTM  D2240
H.D.T.                         ℃             155     ASTM  D684
Moisture  absorption         @100℃/1 Hrs    0.27     ASTM  D570
Gl* transition temperature   ℃             140     ASTM  D256
Thermal shock (no cracking)  10 cycles    -55 to130℃ ASTM  D1674
Cofficient of linear
Themal expansion             cm/℃        4.5X10-4    ASTM  D150
Thermal  conductivity        cal/cm.sec℃ 8.2×10-4   ASTM  D1674
Linermal shremkage             ％             0.2     ASTM  D2566

*TE:
*Keep in cool low temperature(@5℃ or below) avoid moisture and sun shine directiy, to keep long using.

*Avoid conlact of the skin ,eyes and clothes,in case of contact,just wash wish soap and water immediately.

包装规格：  1 KG /罐 (12KG/箱)

具体应用如图：（用在铁芯与金属片接着）